Burley Solo Jogger Owner'S Instruction Manual Download Page 8

Converting your Solo from a Jogger into a trailer is quick and easy…simply 
reverse the steps described above.  

1. 

Remove the brake lever from the handle.  

2. 

Remove the brake cable from the cable clips.

3. 

Take the lock pin out of the tongue receptacle. Brace the underside  

 

of the trailer and pivot the two jogger arms down.  You can also  

 

release the jogger wheel and pivot each arm individually, if  

 

 

necessary.    

4. 

Remove the jogger unit from your trailer.

5. 

Attach the trailer tongue as described in your Solo trailer instruction  

 manual.

MAINTENANCE

Make sure all of the nuts and bolts are secure on your Jogger.  Make sure 
that the brake is working properly.  If you are unsure as to the operation and 
maintenance of the jogger unit, please contact your local bike dealer.

Burley Jogger Limited Warranty

Burley will repair or replace any Jogger parts it de ter mines to be de fec tive for the life of 

the trailer. The owner of a Burley trailer with Jogger parts installed must present the trailer 

for repair at an au tho rized Burley dealer, together with an original sales re ceipt or similar 

proof of purchase. This warranty applies only to the original owner and is non trans fer a ble. 

Burley cannot be re spon si ble for failure due to improper assembly, mod i fi  ca tion of parts 

or in struc tions, neglect, abuse, ac ci dent, and/or normal wear. The war ran ty does not cover 

any trailers used for rental, com pe ti tion, or com mer cial use, nor does it cover Jogger parts 

used on anything other than a Burley trailer.  Burley neither assumes nor authorizes any 

person to as sume any other liability in connection with Burley trail ers, and there are no oral 

agree ments or warranties col lat er al to or affecting this agree ment.  This warranty gives you 

specifi c legal rights. You may also have other rights which vary from state to state.

Copyright © 2004 by Burley Design Cooperative

“Burley” is a registered trademark of Burley Design Cooperative

 

 

 

          

   Printed on recycled paper 

rev4: 04/04

Burley Design Cooperative • 4020 Stewart Rd. • Eugene, OR  97402  USA

(541) 687-1644  •  Fax (541) 687-0436 • email: [email protected]  •  www.burley.com

Summary of Contents for Solo Jogger









Reviews: