U
ŽÍVATEĽSKÝ MANUÁL MIEŠAČOV - MODELY R6202A, R6202B
Page 15 of 19
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations different from those intended could
result
in a hazardous situation.
5) Service
a)
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
6. PRECAUTIONA ON USING MIXER
Attention!
You must abide by the following basic safety measures against electrical shocks,
injuries and the danger of fire when using electric tools. Read and abide by these
instructions before you start to use any tools. These instructions must be kept in a safe
place. You will also find other safety instructions in the accompanying booklets.
_ The equipment must never be used in surroundings where an explosive atmosphere
exists. Never mix in solvents or substances containing solvent that have flash points below
21°C.
_ Do not let the cable touch any parts of your body.
_ Only use the extension cable approved for use in the working area.
_ The unit must only be started and stopped when it is inside a mixing vessel. Ensure that
the mixing vessel is placed on a solid, secure base.
_ Never reach into the mixing vessel with your hands or any other object during the mixing
process.
_ We recommend that you always wear industrial safety gloves and safety goggles when
working with the mixer.
_ Wearing close-fitting clothes is mandatory.
_ Always allow for reaction torque
_ Always wear a dust mask