Burley G4121, Installation, Servicing & User Instructions, Page: 2 / 20

2
INTRODUCTION
Thank you for choosing this burley product. All of our products carry a CE mark which is awarded by an
independent test house (notified body) and shows the fires have been type tested to meet the
essential requirements of the European Gas Appliance Directive and the appropriate British Standards.
This is a highly efficient Flueless Live Fuel Effect Appliance. The burner system is very clean burning and
a catalyst cleans the combustion products even further.
A thermostat in the burner control system adjusts heat output to maintain a room temperature, which
can easily be set by the user. There is also a separate control to adjust the flame effect as required.
Please demonstrate its operation to the customer before leaving.
An oxygen depletion sensing pilot light is also fitted and will sense any significant oxygen depletion in
the room and shut the fire down safely.
DUE TO THE SENSITIVE NATURE OF THE OXY PILOT, IT IS NOT UNUSUAL FOR THE PILOT TO
EXTINGUISH UP TO/AFTER 1 MINUTE WHEN FIRST LIT. RELIGHT AND THE PILOT WILL STAY ALIGHT.
THIS IS DUE TO THE MOIST GASES FORMED BY THE GAS, DROPPING DOWN ONTO THE PILOT
SNUFFING IT OUT, ALONG WITH THE COLD METAL WORK. IT IS SAFE TO LEAVE THE PILOT ON 24
HOURS A DAY TO MAKE LIGHTING EASIER.
BURLEY APPLIANCES IS THE ONLY COMPANY TO BENCH RUN AND THOROUGHLY TEST EVERY SINGLE
GAS FIRE IT PRODUCES. BURLEY IS IN THE UNIQUE POSITION OF KNOWING THAT EVERY APPLIANCE
LEAVES THE FACTORY IN PERFECT WORKING ORDER.
Fireguards .
A fireguard is not supplied with this appliance; however it is recommended that a fireguard to BS6539
or BS6778 is fitted if the fire is to be used in the presence of young children, the elderly and the infirm.
Gas appliances must be installed in accordance with the rules in force. In the UK it is the law that all
gas appliances must be installed by a Gas Safe™ registered installer (formerly CORGI), in accordance
with the Gas Safety (Installation and Use) regulations (as amended). The installation must also be in
accordance with the relevant parts of local and national building regulations and in accordance with
BS5871 pt4 except where Burley instructions state differently. For the Republic of Ireland, reference
should be made to IS813 and ICP3 and any guidance notes from Bord Gais. Failure to have the fire
fitted by a qualified person nullifies ALL guarantees.
Declaration of Conformity
Burley Magiglo Ltd. declares that the appliance described in “Technical data” conforms to the following
standard(s) BS EN 14829: 2007
Efficiency Declaration
This appliance has a thermal efficiency of 100% giving an Energy Efficiency Index of 91%. This is
A rated on all variants/options & emits less than 130mg/kWh NOx