Burley Burley-Solo, User Manual, Page: 12 / 24

12
the inside of the chain stay, over the hitch body, and back to the D-ring at
the end of the tongue.
Make sure that the cone is wedged securely into the stays. The knob should be
fi nger-tight; do not overtighten. The hitch should not move, but should allow
the bicycle complete movement, including lying it down on the ground. It
should clear any racks, bags, or fi ttings you have on your bicycle. If there
is any interference, contact your Burley dealer.
IMPORTANT: Remove trailer from your bicycle when it’s not in use to prevent
deforming the plastic hitch.
Do not operate trailer without hitch safety strap properly installed. A dangling
safety strap can contact spokes and damage rear wheel or cause accident
resulting in serious injury.
Hitch must seat properly into stays and not interfere with racks, bags, or
fi ttings. Inspect hitch and tongue frequently for damage or loose fasten-
ers. Interfering parts or damaged hitch can cause accident resulting in
serious injury.
B
A