This manual covers assembly and application of the Burley line of Alterna-
tive Hitches. The Alternative Hitch allows the use of Burley trailers on
bicycles that will not accommodate the standard Burley hitch. Follow the
instructions specific to your particular model. Enjoy your cycling!
NOTE:
There are two distinct versions of the safety strap for the Alternative
Hitches. The standard safety strap is designed for bicycle frames with both
seat and chain stays, the other is designed for bicycles with mono-stay
frames. Follow the instructions below for fitting either version.
If any of these instructions are not clear or if the hitch does not fit the bicycle
properly, call Burley Customer Service at 1-800-423-8445.
A qualified Burley dealer must install the Burley Alternative Hitch. Failure
to install the Alternative Hitch correctly could result in an accident and
serious injury.
Burley Alternative Hitch
Contents
Section
I.
Preparing the Burley Trailer
2
IIa.
Installing Burley Quick-Release Alternative Hitch
3
IIb.
Installing Burley Nutted, Solid Axle Alternative Hitch
6
III.
Attaching the Burley Trailer to the Alternative Hitch
7
IV.
Maintaining the Alternative Hitch
9
Nutted
Solid Axle
9.5mm
Long QR
140 x 160mm
Short QR
126 x 135mm
Nutted
Solid Axle
10.5mm
Copyright © 2002 by Burley Design Cooperative
“Burley” is a registered trademark of Burley Design Cooperative
Printed on recycled paper
rev 5/03
Burley Design Cooperative • 4020 Stewart Rd. • Eugene, OR 97402 USA
(541) 687-1644 • fax (541) 687-0436
