13
Technicaldata
6
Technical DaTa
6.1
conformity
In accordance with the EC Declaration of conformity, the control head Type 8695 is compliant with the EC
Directives.
6.2
standards
The applied standards on the basis of which compliance with the EC Directives is confirmed are listed in the EC
type examination certificate and/or the EC Declaration of Conformity.
6.3
licenses
The product is approved for use in zone 2 and 22 in accordance with ATEX directive 94/9/EC category 3GD.
Observe instructions on operation in an explosion-risk (Ex) area.
Observe the ATEX additional instructions.
The product is cULus approved. Instructions for use in the UL area see chapter “6.8 Electrical data”.
6.4
Operating conditions
Warning!
solar radiation and temperature fluctuations may cause malfunctions or leaks.
▶
If the device is used outdoors, do not expose it unprotected to the weather conditions.
▶
Ensure that the permitted ambient temperature does not exceed the maximum value or drop below the mini-
mum value.
Ambient temperature
see type label
Degree of protection
Evaluated by the manufacturer:
Evaluated by UL:
IP65 / IP67 according to EN 60529
1)
UL Type 4x Rating
1)
1)
Only if cables, plugs and sockets have been connected correctly and in compliance with the exhaust air concept see
chapter “8 Pneumatic installation”.
6.5
mechanical data
Dimensions
See data sheet
Body material
exterior
PPS, PC, VA
interior
PA6; ABS
Sealing material
exterior
EPDM / FKM
english
Type 8695
