Bürkert 8012 Series, Operating Instructions Manual, Page: 35 / 136

35
Commissioning
Type 8012
8. commissioninG
8.1. safety instructions
Warning
Danger due to nonconforming commissioning.
Non conforming commissioning may lead to injuries and damage
the device and its surroundings.
• Before commissioning, make sure that the staff in charge have
read and fully understood the contents of the manual.
• In particular, observe the safety recommendations and intended
use.
• The device / the installation must only be commissioned by
suitably trained staff.
note
Risk of damage to the device due to the environment
• Protect this device against electromagnetic interference,
ultraviolet rays and, when installed outdoors, the effects of the
climatic conditions.
9. ADjusTmenT AnD
funcTions
9.1. safety instructions
Warning
Risk of injury due to non-conforming adjustment.
Non-conforming adjustment could lead to injuries and damage the
device and its surroundings.
• The operators in charge of adjustment must have read and
understood the contents of this manual.
• In particular, observe the safety recommendations and intended
use.
• The device/installation must only be adjusted by suitably trained
staff.
9.2. pulse output
The pulse output of the device can be parametered with one of the
following functions.
9.2.1. frequency proportional to a volume
This function is used to generate a pulse each time a predetermined
volume of fluid passed.
English