Burkert PTB 03 ATEX 1030 X, Operating Instructions Manual, Page: 18 / 73

18
Start-up
sTArT-uP 9.
safety instructions 9.1.
WARNING!
Danger due to improper operation!
Improper operation may result in injuries as well as damage to the
device and the area around it.
Before start-up, ensure that the operating personnel are familiar •
with and completely understand the contens of the operating
instructions.
In particular observe the safety instructions and intended use.
•
The device may be started by adequately trained personnel only. •
Commissioning 9.2.
Before commissioning, ensure that:
The device has been correctly installed, •
The connections have been correctly made, •
The device is not damaged, •
All bolts are securely tightened. •
mAinTEnAnCE, 10.
TrouBlEshooTing
safety instructions 10.1.
DANGER!
Danger of explosion caused by electrostatic charge!
If there is a sudden discharge from electrostatically charged
devices or persons, there is a danger of explosion in the EX area.
Take appropriate measures to prevent electrostatic charges in •
the EX area.
Clean the device surface by gently wiping it with a
• damp cloth .
Danger due to improper service, repair and maintenance
work!
Service and maintenance work on the device may only be car- •
ried out by authorised and suitably qualified personnel!
Repair work may only be carried out by the manufacturer
• !
When carrying out repair or maintenance work on the system, •
the valve must not be opened and the earth connection must
not be disconnected!
maintenance Work 10.2.
When operated under the conditions described in these instruc-
tions, the units are maintenance-free.
english
PTB 03 ATEX 1030 X