18
Start-up
10.3. control and display elements
A detailed description of the operation and functions of the
positioner and the communication software can be found in
the respective operating instructions.
→
Screw off the transparent cap of the positioner to operate the
keys and DIP switches.
DIP switches
Key 2
Key 1
LED 1
LED 2
Communications
interface
Fig. 11: Description of the control elements
note!
damage or malfunction due to penetration of dirt and
humidity!
• To observe protection class IP65 / IP67, screw the transparent
cap in all the way.
→
Close the device (assembly tool: 674078
7)
).
7)
The assembly tool (674078) is available from your Bürkert sales
office.
10.3.1. operating status
AUTOMATIC (AUTO)
Normal controller mode is implemented and monitored in AUTO-
MATIC operating state.
LED1 flashes green.
MANUAL (MANU)
In MANUAL operating state the valve can be opened and closed
manually via the keys.
LED1 flashes red / green alternately.
on
dip
1 2 3 4
The DIP switch 4 can be used to switch between
the two operating states AUTOMATIC and
MANUAL.
dip switches
function
4
ON
Operating status MANUAL (MANU)
OFF
Operating status AUTOMATIC (AUTO)
Tab. 4: DIP switches
english
Type 8696
Summary of Contents for Positioner TopControl Basic 8696
Page 42: ...42 Transport Lagerung Verpackung Typ 8696 deutsch ...
Page 63: ......
Page 64: ...www burkert com ...
