Type MS08
General Settings - Parameter
52
12
GENERAL SETTINGS - PARAMETER
Go to device
SAC254 Sensor
> function
General settings
> tab
Parameter
.
Detailed view Parameter
Setting
Status LED
Mode
büS
Configuration of the büS interface
Displayed name
For display and Bürkert Communicator
Location
Specify location displayed for the device.
Description
Enter description text for tooltips.
Advanced
Unique device name
for partner assignment
Specify
Baud rate
Specify
Fixed CANopen address (Node ID)
Specify
CANopen address (Node ID)
Bus mode
Set operation mode of the büS interface
Show errors from büS partners
Set whether and
from which partners errors are displayed
Deallocation delay
Time from the loss of a partner
until deletion of its configuration
Alarm limits
Set limits after which the device issues a warning or error.
Supply voltage
Set alarm limit for
supply voltage.
Error low
threshold value is displayed
Error high
threshold value is displayed
Specify
Warning low
threshold value
Specify
Warning high
threshold value
Hysteresis
threshold value is displayed
Device temperature
Set alarm limit
for device temperature.
Error low
threshold value is displayed
Error high
threshold value is displayed
Specify
Warning low
threshold value
Specify
Warning high
threshold value
Hysteresis
threshold value displayed
Diagnostics
Enabling or disabling diagnostics.
PDO Config-
uration
Configuring process data objects
Set the
Inhibit time
value and
Event timer
value for following PDO:
▪
PDO 1
▪
PDO 2
▪
PDO 3
Set the
Inhibit time
values for the
Multiplexed PDO
.
Tab. 29: Settings in the “General settings” configuration area, parameter detailed view