Burkert Flowave 8098, Operating Instructions Manual

Page: 98 / 354

98
Display module settings
Type 8098 FLOWave L
11 DISPLAY MODULE SETTINGS
The section describes the menus related to the display module which is fitted on the device.
11.1 Safety instructions
WARNING
Risk of injury due to non-conforming adjustment.
Non-conforming adjustment could lead to injury and damage the device and its surroundings.
▶
The operators in charge of adjustment must have read and understood the contents of the Operating
Instructions.
▶
In particular, observe the safety recommendations and intended use.
▶
The device/installation must only be adjusted by suitably trained staff.
11.2 Doing the Quick start adjustments when energizing
the device for the first time (display module only)
When the device is energized for the first time, the user is guided to make the following mandatory settings:
• choosing the display language,
• choosing the time zone,
• choosing whether daylight saving (summer time) is automatically taken into account or not,
• setting the date and time,
• choosing the unit system for all the measurements.
When the device has finished the uploading step, the first screen of the
Quick start
is displayed.
→
Display
→
Choose the display language Confirm. The current date and time settings are displayed in
the chosen language.
→
Choose the time zone Confirm.
→
Choose whether daylight saving (summer time) is automatically taken into account ( On ) or not ( Off )
for the display of the time. Confirm.
→
Set the year Confirm.
→
Set the month Confirm.
→
Set the day Confirm.
→
Set the hours Confirm.
→
Set the minutes Confirm. The new date and time settings are displayed.
→
Choose the unit system for all the measurements Confirm.
→
Save the Quick start settings or go back to the parent menu without saving the new settings.
English