Burkert Flowave 8098, Operating Instructions Manual

Page: 230 / 354

230
SAW sensor – Parameter
Type 8098 FLOWave L
15.13.5 Deactivating the damping of the values of the acoustic
transmission
If the damping of the values of the acoustic transmission factor is active, do the following to deactivate it:
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Add. meas. values
→
Acoustic transmission factor .
→
Damping
The
Current settings
are displayed
→
Choose None The New settings are displayed.
→
Save.
The damping of the values of the acoustic transmission factor is inactive.
15.13.6 Changing the error limits, the warning limits and the hysteresis
of the acoustic transmission factor
To change the error limits, the warning limits and the hysteresis of the acoustic transmission factor, do the
following:
→
Go to the CONFIGURATION view.
→
SAW sensor
→
Confirm to access the Parameter view.
→
Add. meas. values
→
Acoustic transmission factor
→
Limits
→
Settings
The
Current settings
are displayed
→
Set the high error limit
→
Set the low error limit
→
Set the high warning limit
→
Set the low warning limit
→
Set the hysteresis value The New settings are displayed.
→
Save.
The limit values and the hysteresis value are changed.
English