Burkert Flowave 8098, Operating Instructions Manual

Page: 19 / 354

19
Description
Type 8098 FLOWave L
5.4.2 Laser marking
Measuring
Equipment
N°E237737
28-06
Type: 8098 FLOWave L
ID:00xxxxxx | S/N:001234
W49MN
CRN 0C21751.5
Supply: 12...35V 5W Max.
IP65 | IP67 | NEMA4X
Ambient Temp: -10°...+70°C
Slot5:
Slot4:
Slot3:
Slot2:
Slot1:
1
2
3
4
5 6 7 8
9
10 11
12
13
1. Type of the device
2. Article number | Serial number
3. Manufacturing code
4. Canadian Registration Number (CRN)
5. Conformity marking
6. Electronic modules
7. Supported protocols, Ethernet device variant
8. Warning: Before using the device, take into
account the technical specifications given in the
Operating Instructions.
9. Certifications
10. Power consumption
11. Operating voltage
12. IP-Codes, NEMA protection type
13. Ambient temperature range
Fig. 7: Laser marking, Type 8098 FLOWave L flowmeter (example of a UL Ethernet device)
5.5 Marking with the MAC address
The marking with the MAC address can be seen by opening the front of the transmitter.
→
To open the front of the transmitter, see chapter 8.9 on page 59 .
DC-B0-58-FF-FF-FF
Fig. 8: Marking with the MAC address of the device (example)
5.6 Certification markings
Certification markings are either located on the Type label of the measuring device or on separate labels.
5.7 Marking of the Unique Serial Number (USN)
The USN is marked on the side of the sensor. The USN is built with the device article number and the
device serial number.
English