Burkert Flowave 8098, Operating Instructions Manual

Page: 135 / 354

135
General settings – Diagnostics
Type 8098 FLOWave L
13.4.2 Reading out the number of loaded client (module)
configurations
The value is valid since the last device start-up.
Do the following:
→
Go to the CONFIGURATION view.
→
General settings
→
Confirm to access the Parameter view.
→
Go to the DIAGNOSTICS view.
→
Configuration provider
→
Number of loaded client configurations
→
Go back to the parent menu.
13.4.3 Reading out the number of reconfigured clients (modules)
The value is valid since the last device start-up.
Do the following:
→
Go to the
CONFIGURATION
view.
→
General settings
→
Confirm to access the Parameter view.
→
Go to the DIAGNOSTICS view.
→
Configuration provider
→
Number of reconfigured clients
→
Go back to the parent menu.
13.4.4 Reading out the number of managed modules
The value is valid since the last device start-up.
Do the following:
→
Go to the CONFIGURATION view.
→
General settings
→
Confirm to access the Parameter view.
→
Go to the
DIAGNOSTICS
view.
English