manualshive.com logo in svg

Burkert 8791 REV.2, Operating Instructions Manual, Page: 58 / 81

Share
Download
Burkert 8791 REV.2 Operating Instructions Manual Download Page 58

58

Mounting and installation

11.3 

Mounting on a continuous valve with rotary actuator

The shaft of the position sensor integrated into the positioner is directly connected to the shaft of the rotary 

actuator.

11.3.1 

Attachment kit (in accordance with VDI/VDE 3845) on rotary 

actuator (Order number 787338)

(Can be obtained from Bürkert as an accessory.)

No.

Pieces

Designation

1

1

Adapter

2

2

Setscrew DIN 913 M4 x 10

3

4

Hexagon bolt DIN 933 M6 x 12

4

4

Spring lock washer B6

5

2

Hexagon nut DIN 985, M4

Table 26: 

Attachment kit on rotary actuators

Additional accessory parts:

The assembly bridge with fastening screws (in accordance with VDI/VDE 3845) can be obtained from 

Bürkert as an accessory under order number 770294.

11.3.2 

Installation

WARNING!

Risk of injury due to improper installation.

 

▶

Installation may be carried out by authorised technicians only and with the appropriate tools.

Risk of injury due to unintentional activation of the system and uncontrolled restart.

 

▶

Secure system against unintentional activation.

 

▶

Ensure a controlled restart after installation.

Procedure:

 

→

Specify the attachment position of the positioner:

 

- Parallel to the actuator or 

- Rotated by 90° to the actuator.

 

→

Determine the home position and the direction of rotation of the actuator.

Type 8791, REV.2

english

Summary of Contents for 8791 REV.2


















































































Reviews:

No comments