17
Technical data
Type 8746 Profibus, 8746 Analogue
6
TechnicAl dATA
6.1
conformity
The product complies with the EU directives according to the EU
declaration of conformity (if applicable).
6.2
Standards
The applied standards, which verify conformity with the EU direc
-
tives, can be found on the EU type examination certificate and/or
the EU declaration of conformity (if applicable).
6.3
operating conditions
WARNING
risk of injury from malfunction that is due to outdoor use.
▶
Do not use the product in outdoor areas.
WARNING
Risk of injury caused by pressure, fluid escape.
Important product-specific data is indicated on the Type label
and the calibration plate.
▶
Only use the product for the specified operating fluid.
▶
Do not exceed the specified calibration pressure.
→
For the special operating conditions of products with ATEX
certification, refer to the ATEX supplement for the product.
6.3.1
Mass flow Meter
Tab. 4:
Operating conditions of an MFM
Ambient temperature
–10 °C...+50 °C
Fluid temperature
•
–10 °C...+70 °C
•
–10 °C...+60 °C for oxygen
Ambient humidity
< 95%, non-condensing
Protection class
according to
EN 60529
1)
The IP-Code is
determined by Bürkert.
The IP-Code is not
evaluated by UL.
IP65
1)
If the following conditions are met:
•
Cables must be connected.
•
Mating connectors must be plugged
in and tightened.
Operating pressure
Max. 22 bar
English
Summary of Contents for 8746
Page 59: ......
Page 60: ...www burkert com...
