Burkert 8681, Operating Instructions Manual, Page: 116 / 166

116
büS/CAN open-Design
15.20.2 Parameters – writing via Logix Designer
Parameters in white fields (rw) can be overwritten (parameters in grey fields (ro) can only be read out):
→
Open the desired gateway as for the reading function and in the “Parameters” tab select e.g. Group:
“All Parameters”
In order to type in or change a value in a white field:
→
Type in a value in the white “Value” field, considering the data type as specified under “Style” (if no
style is specified, it is a string value, in that case click the symbol
to type in).
→
Press the button “OK or “Enter” to accept the value
15.20.3 Access to parameters via Bürkert Communicator
The Bürkert Communicator (Type 8920) makes it easy to read and change parameters. For a detailed
description of the Bürkert Communicator - see the relevant manual (see chapter “4.3 Information and
instructions on the Internet” on page 14 ).
→
Connect the PC (with Bürkert Communicator Type 8920) to the büS/CANopen data line using the “büS
stick”; start Bürkert Communicator Type 8920
→
Click on the icon to add an interface (e.g. “büS COM8”)
→
Select the desired device in the navigation bar (left), open the “Parameter” tab (for special values also
“Diagnostics” or “Maintenance”), search for the desired value/parameter and read it out or change:
english
Control Head Type 8681