26
Pneumatic connection
Type 8653
10.2
Establishing a connection between the device and
the Bürkert Communicator
→
Install the Bürkert Communicator software on the PC.
→
Set the load resistance (at the büS stick or external load resistance).
→
Use the büS stick to establish a connection between the device and the PC.
→
Start the Bürkert Communicator.
→
In the menu bar, click the icon
for
Add interface
.
→
Select
büS stick
.
Finish
.
A connection is established between the device and Bürkert Communicator. The device is
displayed in the navigation area.
10.3
Create the base settings of the field module
→
Click on the + in the navigation area in front of the device name; the configuration sections of the device
will be displayed.
→
Select the configuration section
General settings
.
→
In the detailed application area
parameters
, select the
Set-up
menu.
A start-up wizard will guide you through the base settings of the device.
english