Burkert 8605 Series, Operating Instructions Manual, Page: 31 / 118

31
Configuration
para (parameter) - controller setting 9.3.7.
The controlled coil current cannot follow changes in the input signal at any random speed.
Different sets of control parameters are stored for the internal current control. The controller dynamics can
therefore be set in three discrete steps between:
very fast control with the probably occurrence of overswing behavior and •
slow control with a guaranteed elimination of overswing. •
Set 1: slow
......
Set 3: fast
PArA (Parameter) - Controller setting Figure 23:
addr (address) - interfaces 9.3.8.
Setting of the bus address when using the serial interface (0 to 31).
Addr (Address) - Interfaces Figure 24:
english
Type 8605