Burkert 3004, Operating Instructions Manual

Page: 26 / 130

26
Installation
multivolt or 24 V AC/DC standard version 9.2.2.
The power supply voltage of the actuator is 24 V AC/DC or 100 – 240 V AC (120 – 350 V DC).
Always observe the specifications on the rating plate!
A B C
H G
D E
F
H
A B C D E
G F
Fig. 14: Power supply card for actuators with
25 – 150 Nm Fig. 15: Power supply card for 300 Nm actuators
no. Designation no. Designation
a Screw for earthing E LED 2: Error message
b Connections for control and power supply f LED 3: Power on
C Fuse g Connection for heating resistor
D LED 1: Microprocessor OK h Connection 24 V DC
the rotary actuator can be connected and operated in two different modes:
Three points mode 1.
Open / Closed mode 2.
English
Type 3004