Burkert 2000 INOX, Quick Start Manual, Page: 4 / 9

4
Technical data
Type 2000 INOX
Risk of water hammer when flow inlet over seat!
•
When flow inlet over seat, do not use angle seat valve for liquid
media due to the risk of water hammer.
Risk of burns/risk of fire if used during long-term operation
through hot device surface!
▶
Do not touch the device with bare hands.
▶
Keep the device away from highly flammable substances and
media.
To prevent injuries:
•
Supply only media to the media connections which have been
specified as flow media in the chapter „Technical Data“.
▶
Do not use the Type 2000 INOX in potentially explosive
areas.
▶
Do not physically stress the housing (e.g. by placing objects
on it or standing on it).
▶
Ensure that the system cannot be activated unintentionally.
▶
Only trained technicians may perform installation and main -
tenance work.
▶
After an interruption in the power supply or pneumatic
supply, ensure that the process is restarted in a defined or
controlled manner.
▶
The device may be operated only when in perfect condition
and in consideration of the operating instructions.
▶
The general rules of technology apply to application planning
and operation of the device.
5 TECHNICAL DATA
5.1 Conformity
The angle seat valve, Type 2000 INOX, conforms to the EC Direc -
tives according to the EC Declaration of Conformity.
5.2 Standards
The applied standards, which are used to demonstrate compliance
with the EC Directives, are listed in the EC type test certificate and/
or the EC Declaration of Conformity.
5.3 General technical data
Control functions:
A (CFA) / B (CFB)
CFA: Closed in rest position by spring force.
CFB: Open in rest position by spring force.
Materials and connections: see data sheet
Installation position: Any position, preferably with the actuator
face up.
Inscription of the type label:
Flow 1 2
2000 A 10,0 PTFE VA
Made in German
y
00182076
W1X LU
G3/8 P med 16 bar
Pilot 5,5 - 10 bar
Direction of flow: 1 and 2 = identification of the
connections on the valve housing
Seal material
Housing material
Identification number
Manufacturer code
Permitted control pressure range
Permitted max. medium pressure
Operating
principle
Type
Connection type
Orifice
english