Plus-X ICRU Installation and Operation Manual Rev B
8
Restoring Factory Configuration
To reset the unit to its default configuration, press and hold the MASTER INIT button for three
seconds. The Power LED will flash green to confirm the configuration has been reset. Note that
restoring the
default configuration will reset the unit’s password and IP address, requiring the
initial configuration steps to be repeated as described at the beginning of this document.
Uploading New Firmware
for detailed instructions on uploading firmware to the
Plus-X ICRU.
Getting Help
For technical support, please email [email protected] or call our direct technical support line at
978-486-3711. We will be glad to assist you. The technical support office is open Monday
–
Friday, 9AM to 5PM Eastern time.
Warranty
Burk Technology, Inc. warrants the Plus-X ICRU to be free of defects in materials and
workmanship for a period of 24 months from the date of purchase. Equipment will be repaired or
replaced at the option of Burk Technology and returned freight prepaid to the customer.
Damage due to abuse or improper operation or installation of the equipment or caused by fire or
flood or harsh environment is not to be covered by this warranty. Damage in shipping is not the
responsibility of Burk Technology. A return authorization must be obtained before returning any
equipment. Materials returned under this warranty must be shipped freight prepaid and insured
in the original shipping carton or suitable substitute to Burk Technology, Inc., 7 Beaver Brook
Road, Littleton, MA 01460. Repairs not covered under this warranty will be made at prevailing
shop rates established by Burk Technology.
THE WARRANTY SET FORTH ABOVE IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. BURK TECHNOLOGY,
INC. SHALL NOT BE LIABLE TO ANY PARTY FOR ANY INCIDENTAL, SPECIAL, INDIRECT
OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF THIS EQUIPMENT.
