B-Smart-Lock Combipad
|
March 2017
02- AN/DSW English
ǀ
5
Battery replacement
A
B
C
D
Loosen the screw on the back.
Remove the protective plate.
Remove the batteries.
Insert the new batteries (with both positive poles
facing upwards).
Disposal
Electrical equipment may not be disposed of with household waste! At the end
of its useful life, please take the equipment to a designated collection point.
As a company selling batteries or rechargeable batteries, or devices which are
operated with batteries or rechargeable batteries, we are obliged to provide the
following information about the relevant regulations and obligations concerning
battery legislation:
Used batteries should not be put in household waste. Consumers are legally
obliged to bring batteries back to a suitable collection point either at a retailer or
the municipality for disposal. You will not be charged for disposal. You can also
send your used batteries back to us. Postage must always be fully prepaid on
batteries/rechargeable batteries returned to us for disposal:
BURG F.W. Lüling KG
Volmarsteiner Straße 52
58300 Wetter (Ruhr)
Germany
Used batteries may contain contaminants or heavy metals that can be harmful
to the environment and health. Furthermore, batteries contain valuable materi-
als which can be recycled. The environment and PCE Deutschland GmbH thank
you. The waste bin sign means: Batteries and rechargeable batteries must not
be disposed of in household waste.
The signs below the waste bin stand for:
Pb: Battery contains lead
Cd: Battery contains cadmium
Hg: Battery contains mercury
BURG F.W. Lüling KG
Hegestraße 6
58300 Wetter (Germany)
Fon + 49 (0) 2335 / 63 08-0
Fax + 49 (0) 2335 / 63 08-999
[email protected]
www.burg.de
Installation
First, place the frame of the lock on the inside of the
door around the mounting hole.
Insert the lock from the outside of the door into the
mounting hole at an angle, so that the bolt is located
behind the mounting surface.
Press
the
lock
against
the door from the outside and fasten the frame by
screwing the enclosed screws into the holes provided
for it.
The screws should be tightened by hand (max. 2 Nm).
1.
2.
3.
4.
V
er
si
on
20
17
03
00
1
