B-Smart-Lock Combipad
|
March 2017
02- AN/DSW English
ǀ
2
Dear Customer,
Thank you for choosing the
B-Smart-Lock Combipad
- the
electronic lock for locker and furniture.
This lock is particulary robust and of high qualitiy. It acts as
an organisational closure of closets, cabinets and compart-
ments and allows convenient management of a large num-
ber of users.
Important: please note all warnings and read through
the entire operating manual before you begin configu-
ration.
We hope you enjoy using your new system.
Sincerely, BURG F.W. Lüling KG
B-Smart-Lock Combipad
Introduction
B
C
A
D
A
B
C
D
Latchbolt
Rotary knop
Keypad
Emergency power supply aperture
Default settings
¹
When ordering, please give us your choice of a 9-digit
code. The code can no longer be changed after we have set
it for you.
²
For your own security, program your own master code on
the lock prior to use. You can also give us your desired code
when ordering so we can configure it for you during produc-
tion. The master code can be changed by authorised per-
sons at any time.
General code
Customer-specific¹
Mode
Freely selectable PIN
Master code
934716 ²
PIN length
4
Locking
manual
LED locking indicator
On
Code reenter
Off
General
The latest version of this guide is always available on our
website:
www.burg.de
Contents
General .................................................................... 2
Introduction .............................................................. 2
Default setting .......................................................... 2
Important information ................................................ 2
Technical specification ................................................ 3
Functional description ................................................ 3
Configuration ............................................................ 4
Installation ............................................................... 5
Batterie replacement .................................................. 5
Disposal ................................................................... 5
Important information
▪
Each step of the configuration is confirmed as completed
with a double flash of the LED. It is absolutely imperati-
ve to only begin the next step of the configuration after
this flashing signal.
▪
If you switch from one mode to the other (freely sel-
ectable PIN
fixed assigned PIN; fixed assigned PIN
freely selectable ), all other functions are reset to the
factory settings.
Caution: this does not apply to the
master code and the general code.
