SYSTEM PARTS
•
HMI
The HMI allows the user to control up to 9 individual BHC6003-ER units either via the push buttons on the
HMI or via the Remote Handset and depending on selected configuration control the outputs by varying the
settings from 1 to 10. All together you can preset 9 individual outputs with a maximum rating of 54kW
dependant on configuration. The HMI can switch off all the outputs together or on an individual basis.
When the units are switched back on they resume the setting previously set.
•
The remote Handset
The remote handset works in the same way as the HMI units allowing you to remotely control up to 9
outputs. The handset can switch off all the outputs together or on an individual basis. When the units are
switched back on they resume the setting previously set.
•
The power unit
The BHC6003-ER is designed to accept a 400V three phase supply with respect to Neutral. The unit has a
2 stage supply filter to meet EMC legislation and comes in an IP65 rated enclosure complete with glands. A
4 core low voltage cable is required to wire the Power unit to the HMI allow it to be mounted neatly away
from the main installation.
HANDSET
