background image

manual-rmp210-rmp3545-en-18

Page

 4 / 16 

EG-Declaration of conformity

EG-Konformitätserklärung/Declaration of Conformity

Hersteller / Supplier: 

Bungard Elektronik GmbH & Co. KG
Rilkestraße 1
51570 Windeck   Germany

Bevollmächtigte   Person   für   die   Zusammenstellung

der technischen Unterlagen: 
Person in charge

Jürgen Bungard, Geschäftsführer /general director
Rilkestraße 1
51570 Windeck Germany

Produkt: 

Multilayer press RMP 210 und RMP3545

 

Hiermit erklären wir, dass die oben beschriebenen Maschinen allen einschlägigen Bestimmungen der Maschinen-

richtlinie 2006/42/EG entspricht. 
Die oben genannte Maschine erfüllt die Anforderungen der nachfolgend genannten Richtlinien und Normen:
We hereby declare that the machines described above complies with all relevant provisions of the Machinery Direct -

ive 2006/42/EC.

The above machine meets the requirements of the following guidelines and standards: 

 

Maschinenrichtlinie 2006/42/EG / Machinery Directive 2006/42/EC

EMV-Richtlinie 2014/30/EG / EMC Directive 2014/10830EC

Niederspannungsrichtlinie 2014/35/EG / Low Voltage Directive 2014/35/EC 

 

DIN EN 60204-1 

Sicherheit von Maschinen - Elektrische Ausrüstung von Maschinen - Teil 1: Allgemeine Anfor-

derungen / Safety of machinery - Electrical equipment of machines - Part 1: General requirements

DIN EN ISO 14121-1

 Sicherheit von Maschinen - Risikobeurteilung - Teil 1: Leitsätze /  Safety of machinery - Risk

assessment - Part 1: Principles

DIN EN ISO 12100-1

 Sicherheit von Maschinen - Allgemeine Gestaltungsleitsätze, Risikobeurteilung und Risiko-

minderung /  Safety of machinery - Basic concepts, risk assessment and risk reduction

DIN   EN   55014-1   2012-05

  Elektromagnetische   Verträglichkeit,   Anforderungen   an   Haushaltsgeräte,   Elektrow-

erkzeuge und ähnliche Elektrogeräte, Teil 1: Störaussendung /   Electromagnetic compatibility Requirements for

household appliances, electric tools and similar electrical appliances Part 1: Emission

DIN   EN   55014-2-2009-06

  Elektromagnetische   Verträglichkeit   -   Anforderungen   an   Haushaltgeräte,   Elektro-

werkzeuge  und  ähnliche  Geräte  - Teil 2:  Störfestigkeit  - /   Electromagnetic  compatibility - Requirements  for

household appliances, electric tools and similar apparatus - Part 2: Immunity

Niederspannungsrichtlinie / Low Voltage Directive 2014/35/EG 

Maschinenrichtlinie / Machinery Directive 2006/42/EG/37/EG 

Windeck, 10.1.2018

 

Jürgen Bungard Geschäftsführer

Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany

Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]

Summary of Contents for RMP 210

















Reviews: