MY19B103_1.0_04.01.2019
59
Before the first ride
Figure 19:
Pushing locking lever upwards - by.schulz speedlifter used as an
example
6.2.2.1
Checking the clamping force of the quick releases
Open and close the quick releases on the stem or
the seat post.
The clamping force is sufficient if the clamping
lever can be moved easily from the open final
position into the middle and has to be pressed with
the fingers or base of the thumb from the middle
point onwards.
6.2.2.2
Adjusting the quick release clamping force
If the
clamping lever on the handlebars
cannot be
moved into its final position, screw out the
knurled
nut
.
Tighten the
knurled nut
on the seat post if the
clamping lever's
clamping force is not sufficient.
If you are unable to set the clamping force, the
specialist dealer will need to check the quick release.
EN_MY19B103_1.0_BULLS Brose Lacuba Evo 45 Sport MY19_Inhalt.book Page 59 Tuesday, January 8, 2019 4:38 PM