MY22XXX - XX_1.0_14.06.2022
97
Operation
6.3
Error message
6.3.1
Display
The electric drive system monitors itself
continuously and indicates a known hazard with a
warning symbol or displays a number as an error
message if a known error is detected. The system
may switch off automatically depending on the
type of error. The pedelec can still be used as a
normal bicycle even if the motor no longer
provides assistance.
6.3.1.1 Status LED
There is a status LED in the top left-hand corner
of the display screen.
6.3.1.2 Warnings
Hazardous situations are indicated with warning
symbols on the display screen.
Colour
Flash
sequence
Status
GREEN
Lights up
1
Connect system to the
maintenance tool at the specialist
dealer’s.
RED
Lights up
1
Restart system.
2
If the remote continues to light up
red, have the component replaced
at the specialist dealer’s.
RED
Flashes
1
Restart system.
2
If the remote continues to light up
red, have the component replaced
at the specialist dealer’s.
Table 37: Status LED
Symbol
Description
Method of resolution
Temperatures are
below 4 °C
Take care while riding.
Provide winter
protection.
The system warns of a
fault.
1
Re-start the system.
2
Contact your specialist
dealer if the problem
persists.
A major inspection is
due
Check whether the
buttons are jammed
because dirt has
accumulated between
them, for example.
Clean buttons if
necessary.
Motor overheating
The available riding assis-
tance power is limited.
Leave pedelec to cool
down
Reduction in power
The available riding assis-
tance power is limited.
Contact specialist
dealer.
Low tyre pressure
Function is only available
with the tyre pressure
sensor.
Check tyre pressure
and adjust if necessary.
Table 38: List of display screen warning symbols
