MY22XXX - XX_1.0_14.06.2022
192
Cleaning, servicing and inspection
3
Press the check gauge down with just one
finger until it clicks into place.
Figure 182: Pressing the check gauge down with one
finger
4
Take reading where line A meets line B.
Figure 183: Example of a reading: 20 kg
5
Turn the pedal a quarter. Repeat measurement
at least three times.
6
Convert value read from kg and into pounds
and inch per pound.
Example: 20 kg = 44 In = 44 Ibs
7
Compare value with Table 44 Tension
specification.
If the value is higher than the specification,
reduce belt tension,
If the value is within the specified range, the
belt tension has been correctly adjusted.
If the value is lower than the specification,
increase belt tension.
7.5.9.3 ECO tension tester
Not included in price
1
Attach the measuring stick on the belt.
Figure 184: Attached measuring stick
2
Place the ruler on both belt sprockets.
Figure 185: Ruler in place
Read tension on the tension indicator.
Figure 186: Example: On yellow along lower edge, so
reduce belt tension slightly
Red = increase belt tension
Green = belt tension is set correctly
Yellow = reduce belt tension
A
B
