Bulls 22-15-1078, Translation Of Original Operating Instructions

Page: 140 / 234

MY22B01 - 12_1.0_26.08.2021
139
Cleaning and servicing
7.2 After each ride
Complying with these cleaning instructions is the
only way to reduce wear on components, increase
the operating hours and guarantee safety.
The following items should be ready for use to
clean the pedelec after each ride:
7.2.1 Cleaning the lights and reflectors
1 Clean front light, rear light and reflectors with a
damp cloth.
7.2.2 Cleaning the suspension fork
1 Remove dirt and deposits from the stanchions
and deflector seals with a damp cloth. Check
the stanchions for dents, scratches, staining or
leaking oil.
2 Lubricate the dust seals and stanchions with a
few drops of silicone spray.
3 Care for the suspension fork after cleaning.
7.2.3
Caring for the suspension fork
 Treat dust seals with fork oil.
7.2.4 Cleaning the pedals
 Clean pedals with a brush and soapy water.
7.2.5 Cleaning the brake
 Clean dirt on the rim and brake components
with a slightly dampened cloth.
7.2.6 Cleaning the suspension seat post
 Clean dirt on the articulated joints with a
slightly dampened cloth immediately after a
ride.
7.2.7 Cleaning the rear frame damper
 Clean dirt on the articulated joints with a
slightly dampened cloth immediately after a
ride.
Tool Cleaning agent
Cloth Bucket Water
Dish-washing
liquid
Brush Fork oil
Table 53: Required tools and cleaning agents after each ride