Bullhorn RM2000 Series, Installation And Configuration Manual

Page: 71 / 82

RM2000 Series Installation and Configuration Guide
Glossary 63
Repeat delay in minutes The Repeat delay in minutes value is the
number of minutes between repeated alarm
transmissions for both low and high alarm
conditions.
Report Destination Number(s) assigned to unit by GSM digital
cellular network. Used by Technical Support for
troubleshooting purposes.
Report Origin Number(s) assigned to unit by GSM digital
cellular network. Used by Technical Support for
troubleshooting purposes.
Response Filter Time Optional filter for input channels set up in
analog mode. The response filter slows the
unit’s response to sudden changes in the input
signal. The purpose of the filter is to help
eliminate false alarm transmissions in unstable
environments that have a tendency to produce
temporary noise
Input channels include hardware filters suitable
for rectifier outputs such as those used in line-
powered CP systems. Response Filter Time
applies a response time to the input channel in
addition to a hardware filter response. Actual
response time may vary based on variables such
as the current input voltage level and position of
the unit’s polling cycle.
Table D-1. Glossary of Technical Terms (continued)
Term Definition