Bull NovaScale R440 E1, User Manual, Page: 159 / 366

User Guide
158
www.bull.com
Equipment Log
Use the equipment log form (product configuration record table) located at the end of
this manual to record the model and serial number of your server, installed options, and
any other pertinent information specific to your server. You will need this information
when configuring your server.
See “Appendix 8: Equipment Log” on page 358.
Tools Recommended
for Upgrading Your Server
Depending on the upgrade, you will need one or more of the following tools:
■
Phillips screwdriver (#1 bit and #2 bit)
■
Flat-head screwdriver
■
Small needle nose pliers
■
Pen or pencil
■
ESD workstation or antistatic wrist strap (recommended)