User Guide
218
www.bull.com
2.
Remove the front panel.
See “Removing the Front Panel” on page 203.
3.
Locate the memory upgrade sockets on the motherboard.
Figure 170: Upgrading the Memory
4.
Press the plastic clips at the outer edge of the socket away from the memory
module. This ejects the memory module from the socket (see “A” on
Figure 170). Do not touch the module's metal "fingers." Store the module in an
anti-static bag (available at electronic supply stores) or a cardboard box.
5.
Align the new module with an empty memory socket. Make sure the notch on
the module aligns with the key in the socket. The module is designed to install
into the socket in only one way (see “B” on Figure 170).
6.
Press the module firmly into the socket (see “C” on Figure 170). If you have
difficulty installing a module, do not force it! Carefully remove the module,
then check the alignment of the module's notch with the one in the socket.
Then re-install the module.
7.
Make sure the locking clips at either end of the module click closed (see “D”
on Figure 170). If the brackets do not secure themselves to the module,
carefully remove the module, then reinstall it.
8.
Replace the front panel.
See “Replacing the Front Panel” on page 204.
9.
Replace the left side cover.
See “Replacing the Left Side Cover” on page 202.
Note: The amount of installed memory will be automatically
detected by the system.
AF002309
DIMM 1A
Socket
DIMM 2A
Socket
DIMM 2B
Socket
DIMM 1B
Socket
A
C
D
B
Summary of Contents for NovaScale R410 E1
