Bull NovaScale 5 5 Series, User Manual

Page: 187 / 384

5-21
Tips and Features for Administrators
Setting up PAP Unit Users
As Customer Administrator, you must set up user accounts and passwords to control access
to the PAP unit.
The Microsoft Windows operating system pre–installed on the PAP unit provides standard
security features for controlling access to applications and resources. PAM software security
is based on Windows
)
user management and you are advised to give Windows
)
administrator rights to at least one member of the PAP Customer Administrator user group.
For further details about user management, refer to the Microsoft Windows documentation
on the Bull NovaScale Server System Resource CD.
Note:
You are advised to change the temporary Administrator password ( administrator ) used for
setup purposes and to maintain a detailed record of authorized users.
Predefined PAP User Groups
For optimum security and flexibility, the Microsoft Windows software environment is
delivered with two predefined Customer user groups:
Pap_Customer_Administrators Group (CA)
This group is designed for customer representatives responsible for the overall
management, configuration, and operation of the system. Members of the Customer
Administrator group are allowed to configure and administrate the server and have full
access to the PAM
Domain Manager , Hardware Monitor , History Manager and
Configuration Tasks menus, as shown in Table 35.
Pap_Customer_Operators (CO)
This group is designed for customer representatives responsible for the daily operation of
the system. Members of the Customer Operator group are allowed to operate the server
and have full access to the
Domain Manager menu and partial access to the History
Manager menu, as shown in Table 35.
Notes:
•
Group membership also conditions which Event Messages a user will receive via the
PAM Web interface. See
Setting up Event Subscriptions , on page 5-86.
•
The predefined Customer user groups have been designed to suit the needs of most
Administrator and Operators. Contact your Customer Service Engineer if you require a
customized user group.
Warning:
The two predefined Support user groups:
– Pap_Support_Administrators
– Pap_Support_Operators
are reserved EXCLUSIVELY for authorized Customer Service Engineers in charge
of monitoring, servicing, and upgrading the system.