Bull NovaScale 5 5 Series, User Manual

Page: 111 / 384

3-35
Managing Domains
Adding Cells to a Domain
Notes:
•
At least one Cell, containing one IOC and one QBB, must be available.
•
The Operating System must support added hardware.
•
The domain must be INACTIVE before configuration changes can be made.
•
When you add a Cell to a NovaScale 6085 Server domain, the server will operate as a
single SMP system, using all hardware resources.
To add Cells to a domain:
1. Click Domain Manager to open the Control pane.
2. Select the required domain.
3. Click Modify in the Command bar to open the Modify Domain dialog.
Note:
The Modify Domain dialog can also be accessed from the View Domain dialog.
Add Cell button
* Module 1 (Cell_2 & Cell_3): does not equip mono–module servers
Figure 51. Modify Domain – Add Cell dialog
4. Click Add Cell . The Add Cells to Domain dialog opens.
Note:
If a No CELL available message appears, you must first delete the domain using the cell.
See Deleting a Domain , on page 3-44.