Bull Escala EL260B, Installation And User Manual

Page: 38 / 78

22
Escala Blade EL260B - Installation and User's Guide
3.3 Removing the blade server cover
Remove the blade server from the chassis unit and press the blade server cover releases to
open and remove the blade server cover.
Figure 3-2. Removing the cover
Perform the following procedure to open and remove the blade server cover.
1. Read “Safety” on page ix and the Installation guidelines on page 19.
2. Shut down the operating system, turn off the blade server, and remove the blade
server from the Bull Blade Chassis. See Removing the blade server from a Bull Blade
Chassis on page 21.
3. Carefully lay the blade server on a flat, static-protective surface, with the cover side
up.
4. Press the blade-cover release on each side of the blade server and lift the cover open.
5. Lay the cover flat, or lift it from the blade server and store it for future use.