9
Accessories
What is in the accessory box?
The following accessories are included in the accessories box with the purchase of the Builder Extreme:
Quick start
to successfully install the machine
Nozzle 0.4 mm
Installed on the print head
Nozzle 0.8 mm
For bigger layer heights
Nozzle 1.2 mm
For rough prints
Spare Teflon tubes
Spare tubes for print head
Allen key 2.5 mm
To remove/replace the nozzle
Feeler gauge
Check the distance between nozzle and bed
Pressure plug 2 x
Remove any stuck filament inside the print head
Power cord
Power up the machine
Spare paint roller set
To apply glue. (Already applied in the Builder factory)
Wood glue
For the print bed (already applied in Builder factory)
Level tools 2 x
To level the machine (not the bed)
Heater block key
To get grip when removing the nozzle
Wheels 4 x (Extreme 1500 PRO only) To move the machine to another location
Optional
Bofa air filter
Print head (spare)
Filaments
grease gun
