Page 3 of 28
1
General Information
This manual is copyrighted, all rights reserved. It may not be, in whole or in part, copied, photocopied,
reproduced, translated, or reduced to any electronic medium or machine-readable form without prior consent
in writing from Build Test Solutions (BTS) Ltd. Furthermore, it may not be distributed electronically in any format,
without prior consent from Build Test Solutions (BTS) Ltd.
Thank you for choosing the Pulse air permeability measurement system, a low pressure Pulse (LPP) technology.
The Pulse 2.0 product includes a variety of features and testing options to allow for the safe and efficient testing
of the air leakage characteristics of buildings and enclosures.
This manual provides factory prescribed operation and maintenance procedures for a Pulse 2.0 LPP Unit. The
procedures illustrated in this document are only to be performed by competent, authorised personnel. For
further information regarding the procedures outlined in this document please contact BTS Ltd before
proceeding.
We strongly recommend you read this guide thoroughly before attempting to use the Pulse unit. It is also
recommended that you receive approved training prior to the use of this technology.
Support and Manufacturers Details
Pulse is a technology manufactured by Absolute Air & Gas Ltd, and supplied by Build Test Solutions Ltd
Address: 16 St John’s Business Park, Lutterworth, Leicestershire, LE17 4HB, United Kingdom
Tel. No: 01455 555 218
Internet: www.buildtestsolutions.com
Email: [email protected]
