Page 23 of 28
To exit this menu, select “Main Menu” at the bottom of the page, below the stored tests.
8.3.1
Export/Delete
Tap each test that you wish to export or delete, or if you would like to act upon all tests, select “All”, to remove
your selections, press “none”.
Once the correct tests have been selected, choose “Export” to move the test files to USB, or “Delete” to delete
them from the system memory.
WARNING: Pulse has no recycle bin or undo function, only delete data when you are sure that it is no longer
useful as it will be permanently deleted.
8.3.2
Rerun
To save re-inputting settings for a test that has been carried out previously, selecting the “Rerun” icon next to a
test will take you to the test screen with all settings and parameters inputted as per the test chosen, allowing
for quick repetition.
Note: Pulse will automatically remember and populate test settings as per the last test carried out, until it is
switched off, so this feature is not required for consecutive repeated testing.
8.3.3
Show
To revisit the results from a past test, select the “Show” icon next to a test, the results will be displayed again.
8.4
Settings
Setting date and time can be achieved by moving the dials to the correct figures and selecting “Set”.
