Buhler Inland 1500, Operator And Parts Manual

Page: 9 / 81

bühler
1500 Bale Carrier
7
Safety Decals
The terminology and decal location illustration shows the approximate location and
detail of safety decals. To install safety decals ensure the installation area is clean and
dry. Decide on the exact position before you remove the backing paper. Remove the
smallest portion of the split backing paper and align over the specified area. Carefully
press in place. Slowly peel back the remaining paper and smooth the remaining portion
in place. Small air pockets can be pierced with a pin and smoothed out. Keep all decals
clean and replace any that are damaged or missing. Replacement decals are available
from you local dealer. The following pictorials indicate important precautions to be used
during the operation of the 1500 Bale Carrier.
19. Part # A7017-00
7. Part # 813633
1. Part # 813624 2. Part # 813625 4. Part # 813626
5. Part # 813627
6. Part # 813632
11. Part # 813636 10. Part # 813637
3. Part # 21867
SW700
WARNING
To prevent serious injury or death:
Relieve pressure on system
before repairing or adjusting or disconnecting.
Wear proper hand and eye protection
when searching for leaks. Use wood or
cardboard instead of hands.
Keep all components in good repair.
HIGH-PRESSURE FLUID HAZARD
8. Part # 813635
14. Part # 813952
BUHLER BALE CARRIER 1500/2500 SNUBBER UNIT
(NO SERVICEABLE PARTS INSIDE)
DECAL PN: 813952
CONTINUITY LIGHT
P/N: 813949
YELLOW REFLECTIVE
16. Part # 967055
RED RELFECTIVE
15. Part # 967053
ORANGE FLOURESCENT
17. Part # 813631
18. Part # 813628
AMBER REFLECTIVE
13. Part # 814457
1500
12. Part # 814490