Buhler GAS 222 Series, Installation And Operation Instruction Manual

Page: 19 / 41

Bedienungs- und Installationsanleitung
Installation- and Operation Instruction
Gasentnahmesonden /
sample
gas
probe
Baureihe
/ Series
222.20-HT / 222.20-HT-OW-OR
BX460026, 01/2011 Art. Nr. 90 31 181 19
1 Introduction
The GAS 222.xx series of sample gas probes are designed for installation in gas analysing systems in
industrial applications. Sample gas probes are very important components in a sample conditioning system.
Hence it is essential to read this manual carefully and check that all application parameters are completely
matched by the selected gas probe (see chapter 10). In addition check also the shipment and make sure
you have received all parts.
This manual is suitable for different probes of the GAS 222.xx -series due to similarities of the probes (see
chapter 4.1). You can find the probe type on the type plate, showing the serial number and also the part
number and type marking.
If there are special instructions for a certain probe type, they are described in the manual.
Regard the specific limits of the gas probe. Please only order the spare parts which matching the probe
type.
2 Important advice
Operation of the device is only valid if
-
the product is used under the conditions described in the installation- and operation instruction, the
intended application according to the type plate and the intended use. In case of unauthorized
modifications done by the user Bühler Technologies GmbH can not be held responsible for any damage,
-
the performance limits given in the datasheets and in the installation- and operation instruction are
obeyed,
-
monitoring devices and safety devices are installed properly,
-
service and repair is carried out by Bühler Technologies GmbH, unless described in this manual,
-
only original spare parts are used.
This manual is part of the equipment. The manufacturer keeps the right to modify specifications without
advanced notice. Keep this manual for later use.
Signal words for warnings:
NOTE
Signal word for important information to the product
CAUTION Signal word for a hazardous situation with low risk, resulting in damage to the device or
the property or minor or medium injuries if not avoided.
WARNING Signal word for a hazardous situation with medium risk, possibly resulting in severe
injuries or death if not avoided.
DANGER Signal word for an imminent danger with high risk, resulting in severe injuries or death if
not avoided