Dissassembly and Disposal
Disassembly
102
SnackFix
2016-08
11.2 Disassembly
Before beginning disassembly:
Switch off the machine and secure against restarting.
Disconnect power supply from the machine physically, discharge
stored residual energy.
Remove operating and auxiliary materials as well as remaining
processing materials and dispose of in an environmentally com-
patible manner.
Finally clean components and assemblies professionally and disas-
semble according to local valid industrial safety and environmental
protection regulations.
11.3 Disposal
Insofar as no return or disposal agreement has been made, bring
disassembled components to recycling centre/firm:
Scrap metals.
Give plastic elements to the recycling/firm.
Dispose of remaining components sorted according to material
composition.
NOTICE
Danger to the environment from improper disposal!
Hazards to the environment can occur due to improper disposal.
Only allow authorised specialty companies dispose of e-waste,
electronic components, lubricants and other auxiliary materials.
When in doubt, request information on environmentally compati-
ble disposal from the local authorities or specialised disposal
companies.