ELK
3 Transport and storage
Only transport the product inside the original packaging or a suitable alternative. Ensure secure fastening and mooring.
Air coolers have M8 or M10 eye bolts at the top of the cooler housing for transport. Please note, due to the variety of versions the
mounting bracket is not located at the centre of gravity and the cooler may swing when hoisted.
Only use the motor transport eyes to hoist the motor without add-ons.
Do not use the eye bolts according to DIN 580 in ambient temperatures below -20 °C. The eye bolts could fracture in these tem-
peratures, injuring personnel and/or damage the system.
Do not strain the eye bolts more than 45° in the thread direction.
When not in use, the equipment must be protected from moisture and heat. It must be stored in a covered, dry, dust-free room
at room temperature.
WARNING
Crushing hazard
Crushing hazard during equipment transport and set-up.
Use the correct hoisting gear to prevent injuries during hoisting.
Be sure the hoisting gear is free from defects and approved for the weight of the device.
Ensure secure fastening and mooring when transporting.
5
Bühler Technologies GmbH
BE350034 ◦ 08/2022
Summary of Contents for 35ELK10040
Page 23: ......
