AGF-FE-1, AGF-FE-2
1 Introduction
1.1 Intended Use
AGF-FE filters were designed specifically for front panel installation in analyzers or systems. All types can be used for filtering
sample gas.
Please note the specifications in the data sheets on the specific intended use, existing material combinations, as well as pres-
sure- and temperature limits.
1.2 Design types
If a filter type has special features, these are described separately in the operating manual. When connecting, please note the
specific values of the filter, and the correct version when ordering spare parts.
Please refer to the nameplate to identify your model. In addition to the job number it also contains the item number and model
designation.
Filter type
Description
AGF-FE-1
PA / PC / Viton filter;
Fibreglass filter element
AGF-FE-1-T
PA / PC / Viton filter;
PTFE filter element
AGF-FE-2
PVDF / stainless steel filter;
Fibreglass filter element
Tab. 1:
Filter type overview
1.3 Scope of delivery
– 1 x Filter
– Product documentation
2
Bühler Technologies GmbH
BE410009 ◦ 06/2019
