background image

22

WARRANTY

Limited 3-Year Warranty

Model  _____________________________
Serial No.  __________________________
Date Purchased:  ____________________
Where Purchased: ___________________

For a period ending one (1) year from the date of invoice, Manufacturer warrants that any new machine or part is free 

from defects in materials and workmanship and Manufacturer agrees to repair or replace at its option, any defective part 

or machine.  HOWEVER, if the invoiced customer registers the Product Warranty by returning the Warranty Registration 

Card supplied with the product within 90 days of the invoice date, or by registering on-line at www.bugo.com, Manufacturer 

will extend the warranty period an additional two (2) years which will provide three (3) total years from the date of original 

invoice to customer.  This warranty does not apply to machines which, after Manufacture’s inspection are determined by 

Manufacturer to have been damaged due to neglect, abuse, overloading, accident or improper usage.  All shipping and 

handling charges will be paid by the customer.    

The foregoing express warranty is exclusive and Manufacturer makes no representation or warranty (either express or 

implied) other than as set forth expressly in the preceding sentence.  Specifically, Manufacturer makes no express or 

implied warranty of merchantability or fitness for any particular purpose with respect to any goods. Manufacturer shall not 

be subject to any other obligations or liabilities whatsoever with respect to machines or parts furnished by Manufacturer.

 

Manufacturer shall not in any event be liable to Distributor or any customer for any loss of profits, incidental or consequen

-

tial damages or special damages of any kind.  Distributor’s or customer’s sole and exclusive remedy against Manufacturer 

for any breach of warranty, negligence, strict liability or any other claim relating to goods delivered pursuant hereto shall be 

for repair or replacement (at Manufacturer’s option) of the machines or parts affected by such breach.

Distributor’s Warranty:

In no event shall Manufacturer be liable to Distributor or to any customer thereof for any warranties, representations or 

promises, express or implied, extended by Distributor without the advance written consent of Manufacturer, including but 

not limited to any and all warranties of merchantability or fitness for a particular purpose and all warranties, representations 

or promises which exceed or are different from the express limited warranty set forth above.  Distributor agrees to indemnify 

and hold Manufacturer harmless from any claim by a customer based upon any express or implied warranty by Distributor 

which exceeds or differs from Manufacturer’s express limited warranty set forth above.

HOW TO OBTAIN SERVICE:
If you think this machine is not operating properly, re-read the instruction manual carefully, then call your Authorized 
BUG-O dealer/distributor. If they cannot give you the necessary service, write or phone us to tell us exactly what 

dificulty you have experienced. BE SURE to mention the MODEL and SERIAL numbers.

Summary of Contents for GO-FER III-OX























Reviews: