74
Cause 6. The LAN board or hub transmission mode has not been set.
Change the transmission mode in the LAN board or hub to “10M semi-duplex” or “100M semi-duplex”. Some LAN boards
or hubs may be unable to connect to the network correctly when the transmission mode is set to “Auto Negotiation”.
Cause 7. A network bridge is installed.
If the network has a network bridge that is not being used, remove it.
Cause 8. You are searching from a different network.
You cannot conduct searches beyond your local network subnet. Connect the TeraStation to the same network subnet
as the computer performing the search.
Cause 9. TCP/IP is not operating correctly.
Reinstall the LAN adapter drivers.
Cause 10. “Remote Desktop Connection Client for Mac” is not installed on your Mac.
If using OS X 10.4 or later, download and install “Remote Desktop Connection Client for Mac 2” from www.microsoft.
com.
When TeraStation shared folders suddenly do not open
If the TeraStation shared folder is assigned and used as a network drive, access to the TeraStation may suddenly fail if
network settings such as IP addresses or groups are changed. If this happens, follow the procedure in chapter 2 to open
the TeraStation’s shared folder with NAS Navigator2.
If you are unable to access the shared folder or the system is unstable
This usually happens because too many software applications are running in Windows Storage Server, causing
a memory shortage. Exit or uninstall some of the software running in Windows Storage Server, then restart the
TeraStation.
Windows Storage Server Recovery Procedure
If Windows Storage Server no longer functions properly, perform recovery using the supplied USB device.
This recovery procedure makes your data erased. Backing up regularly is highly recommended to avoid missing your
important data.
Do not connect the supplied USB device to another TeraStation. The recovery process performed by the supplied USB
device is intended for this product only.
Summary of Contents for TeraStation WSS 5000R2
