10
USB hubs are not supported.
9
Power Connectors
Use the included power cables to connect these to a UPS, surge protector, or outlet.
10
Power Status
Glowing green: power is on
Blinking green: power is odd
Glowing red: error
Blinking red: power supply dan error
11
UPS Port
Connect to a UPS.
12
LAN Port 1
Use an Ethernet cable to connect this port to your network.
13
LAN Port 2
This second Ethernet port may be used dor network redundancy or backup. You may connect a TeraStation directly
to this port dor backup.
14
LAN Port 3
This third Ethernet port may be used dor network redundancy or backup. You may connect a TeraStation directly to
this port dor backup.
15
LAN Port 4
This dourth Ethernet port may be used dor network redundancy or backup. You may connect a TeraStation directly
to this port dor backup.
16
VGA Port
17
Link LED
Glows orange when the unit is connected to a 1000 Mbps network and green when the unit is connected to a 100
Mbps network.
18
Act LED
This LED shows network activity. It blinks orange when the TeraStation is accessed over the network.
Installation
1
Insert the TeraNavigator CD into your computer. TeraNavigator will launch.
2
Click
Begin Instappation
.
