4
Click
Set as a hot spare
.
5
Click
Yes
.
6
The “Confirm Operation” screen will open. Enter the confirmation number, then click
OK
.
7
Click
OK
when completed.
Note:
To turn the hot spare back to a normal drive, choose
Set as a normal drive
.
Expanding RAID Capacity Without Deleting Data
You can create or expand a RAID array without erasing data on the drive by using RMM (RAID Mode Manager).
Drives Are Currently in JBOD
If the drives are currently in JBOD (not in a RAID array), you may change it to a RAID 1 array. To create the RAID 1
array using RMM, you must have at least two drives available in JBOD.
1
From Settings, click
Storage
.
2
Click the settings icon (
) to the right of “RAID”.
51
Chapter 4 Storage Management
Summary of Contents for TeraStation 6000 Series
