manualshive.com logo in svg

Buffalo TeraStation 6000 Series, User Manual

Share
Download
Buffalo TeraStation 6000 Series User Manual Download Page 48

5 

Change the “Error Behavior” option to “Shut down” and click 

OK

.

Configuring Actions for If a Drive Used for the RAID Array Has Not 
Been Discovered

The TeraStation can configure actions for if a drive used for the RAID array cannot be mounted when booting.

Displaying or Hiding the Confirmation Screen

Configure to display or hide the confirmation screen for selecting actions for if a drive used for the RAID array 
cannot be mounted when booting. It is configured to display the confirmation screen by default. To hide the screen, 
follow the procedure below.

1 

From Settings, click 

Storage

.

2 

Click the settings icon ( 

 ) to the right of “RAID”.

47

Chapter 4 Storage Management

Summary of Contents for TeraStation 6000 Series



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands