Buffalo TeraStation 5010, User Manual

Page: 71 / 176

70
9
Select the backup destination and click OK .
10
Click OK . Jobs added to "Backup List" are displayed.
11
Click Close .
Backup Logs
The following backup error codes may be recorded in the backup log. Read the description and try the respective
corrective actions for the error.
Code Description Corrective Action Log Example
Code 3
The backup destination USB
drive could not be found.
Verify that the backup destination
USB drive is connected to the
TeraStation properly.
rsync error: errors
selecting input/
output files, dirs (code
3) at main.c(634)
[Receiver=3.1.0]
Can't write to backup
destination(target
disk is broken?).
Code 5
The backup destination shared
folder could not be found.
Verify that the Ethernet cable is surely
connected and that the hub or other
devices on the network are turned on.
rsync error: error
starting client-server
protocol (code 5) at
main.c(1504)
Code 10
The Ethernet cable was
disconnected from the backup
source TeraStation when the
backup job started.
Reconnect the Ethernet cable.
rsync error: error in
socket IO (code 10)
at clientserver.c(128)
[sender=3.1.0pre1]
Code 11
The drive capacity of the
backup destination TeraStation
became full.
Delete unnecessary files and folders.
rsync error: error
in file IO (code 11)
at receiver.c(389)
[receiver=3.1.0]